Barn Wood Buffet

My husband and I have been inspired by Pinterest. We see projects made from trash, and our imagination runs wild. I have always been a trash-to-treasure kind of person, but I never got into big things. All of mine were small hand crafts. Now that I got my husband (the one of us who owns a gazillion tools) hooked on Pinterest, we've been brainstorming together. We're trying to get our rustic-style house fixed up to put on the market so we can move closer to his son's school, and we've been doing many odd jobs ourselves. If you don't have a neatly laid out furniture arrangement, though, the house is just not going to show as good. So... we decided to take that matter into our own hands, too. Since we can't afford to go out and buy all new furniture, we're making it. We located a barn that was falling down. We searched until we figured out who owned it, contacted the owners, and got permission to take some of the wood.

We got the wood (and one sheet of rusted tin) to our house and stared at it for a long time trying to figure out what to make.

We came up with the idea, my husband drew it out and figured the measurements, and we began building.

Clearly, he's so good to patiently teach me what to do, and he not only allows but encourages me to use his tools.

We used new wood to supplement the old barn wood. We wanted the inside to be solid and sturdy with the new wood, and we wanted to save the old wood for the part that would be seen.

After getting the face and frame built, we cut old boards for the sides.

We took it down off the sawhorses to put the top on it. The boards we used for the top had other boards nailed into it that we had to remove so it would fit. We wanted to keep the look of the old rusty nails, though, so we cut each of them off on the other side.

We used a pocket jig to attach the frame of the doors together. Before attaching the boards, though, we used a router to cut a slot to hold the tin.

I used tin snips to cut out the tin, brushed it down with a wire brush, and sealed in the rust with spray polyurethane. Tim then attached the doors to the unit.

Drawers and I don't get along, so he built all the drawers and installed them.

I cut the tin for them, routed the area of the tin, attached the tin to the drawer fronts, and installed the pulls that I got 50% off at Hobby Lobby. He then put the fronts on the drawers.

And.... Voila!

We got it moved inside and put a few items on it. You can see some of the fresh cut edges. We'll have to weather them to make them match the rest of the wood, but we were so eager to get it inside that we decided we could do that once it was in.

You may recognize those shelves above it from a previous post. We placed it in our breakfast/dining area under those shelves, added a shelf inside each side of cabinet of the buffet, and filled it with all our small appliances that were cluttering up the kitchen. It's amazing what a difference it makes in our kitchen/dining area. 

All toll, we spend about $35-$40 dollars on this piece. It could easily sell for $800 or more. It took a lot of time to build, but we definitely had quite a bonding experience through it. We will without a doubt be building more barn wood furniture together!

Stay tuned for our new/old barn door dining table that we are in the process of building.....